Coy Laboratory Products> Products> Anaerobic Chambers> Vinyl Anaerobic Chambers

A vinyl anaerobic chamber by Coy Laboratory Products

Vinyl Anaerobic Chambers

Coy Lab’s Vinyl Anaerobic Chambers provide a strict anaerobic atmosphere of 0-5 parts per million (ppm) using a palladium catalyst and hydrogen gas mix of 5%. The heavy duty vacuum airlock allows sample transfer without changes to the internal atmosphere. The programmable airlock allows the user to tailor an interchange sequence ideal for their lab experiments.

The flexible nature of the unit allows for the user to reach deeper and higher into the unit and, combined with padded base and larger glove ports, allows for greater ergonomics vs. a rigid glove box. The optically clear vinyl greatly increases operator vision, and the user does not encounter any glove “fight back” as the flexible nature allows the entire glove box to give with changes to internal volume. The fact the unit does not expel gas when pressure changes means a dramatic difference in gas consumption rates and thus operational cost savings.

Details
Specifications
Downloads
Buy Parts

Coy Vinyl Anaerobic chambers are constructed of flexible PVC with padded base, efficient vacuum airlock, and aluminum support frame. And features the following.

Large equipment entry port
Replaceable gloves
Circulation System and Catalyst
Interior power supply with 5 outlets
Ports for additional tubing or cords
Vacuum pump included
Temperature control options

The Coy Vinyl Anaerobic Chamber is the most cited chamber in the world for anaerobic microbiology because it is the strictest anaerobic system on the market and the most efficient with regards to gas consumption. The vinyl expands and contract to allow for changes in internal pressure without expelling the expensive gas mix to room atmosphere saving you up to 60% on your operational gas cost annually.

The large oval glove ports allow all user to reach deeper and higher into the chamber for greater storage capacity and ergonomics. This allows a vinyl unit to be manufactured larger than other rigid style units which in turn makes it easier to maintain the anaerobic chamber conditions and helps create a stricter control of the anaerobic conditions.

NEW! Quick Change Cuffs

Introducing the latest innovation for the most cited anaerobic chamber in the world: the Quick Change Cuff (QCC) system for the Coy Vinyl Anaerobic Chambers. What use to be a 20-30 minute exchange is now ≤ 30 seconds with the QCC. Read more »

Glove Box Specifications	Type C	Type A	Type B
Construction Material	Vinyl (PVC) and Aluminum
Total Glove Box Footprint	153 L x 97 D (H= 142) cm	200 L x 97 D (H= 142) cm	249 L x 97 D (H= 142) cm
Interior Work Area	106 L x 81 D cm	149 L x 81 D cm	198 L x 81 D cm
Chamber Dimensional NOTE: Due to the flexible nature of the unit the above dimensions can vary with operational pressure.
Glove Port Style	27 w x 43 H Oval
Catalyst	Palladium (maintains 0-5 parts per million Oxygen)
Glove Box Temperature Control (option)	+3 ambient to 40° C Standard on all Heated Chambers
Glove Box working Incubation Capacity	576 x 90mm Petri Dishes	1152 x 90mm Petri Dishes	1344 x 90mm Petri Dishes
Airlock Capacity	78 x 100mm plates
Airlock Cycle Times	30 – 160 seconds User Adjustable
Interior Power Supply	4 outlets Standard 110 or 220volt options available *Note certain optional accessory equipment from Coy may occupy some or all of these outlets
Glove Material	Vinyl Sleeve with Latex Glove *Neoprene optional for those with latex allergies
Additional Access Ports
Cords/Tubing	68.5cm dia. Port Left side location as standard
Gas Requirements	Dual or Single tank operation Background Gas (any inert gas usually N₂) and Anaerobic Gas (5%H₂) CO₂ % mixes are based on biological study needs and not necessary to chamber operation

Primary Catalog

Coy Vinyl Anaerobic Chamber 032714 (PDF)

Accessories Catalog

Instruction Manuals

Some common parts and accessories are available for online purchase with credit cards only. All on-line sales are final. If ordering by P.O., please submit your P.O. to orders@coylab.com. Please note that some accessories do not fit all products.